Industrial Bearing Stethoscope

Empowered by our technically advanced infrastructure, we are manufacturing and supplying Industrial Bearing Stethoscope. The entire range is manufactured by making use of fine grade material that is supplied by trustworthy vendors of the industry. These products are commonly used to locate flaws in machine tools, steam traps, valves and motors bearings. As we maintain a huge stock of Industrial Bearing Stethoscope, we are able to supply bulk quantities of the offered product in a lesser time period.

Features:

Other details:

Just hook it into your ears, put the probe on the machine component or a Steam trap, valve or

anything where there is mechanical movement or flow inside & hear the sound carefully.

HOW ONE MAKES USE OF IT ?

What can not be seen, can be heard. That is what doctors do. They hear the patient's problems

through theit stethoscopes. Likewise, Engineers can hear the audio signals of a faulty machine or its

components.One often talks about old mechanics who moments, after entering the plant could tell

where & what is wrong You dont have to grow old to do the same, Just hear the heart-beat of your

machines & equipments through-out Here are a few examples :- From a faulty steam trap one

would hear the hissing sound steam escapimg.

It would be quite different from what the trap is supposed to discharge.

In case of a leaky valve one would hear some sound even when it is completely closed. For a perfectly

closing valves there should be sound.

When in a properly running bearing, one would hear uniformly consistent sound of balls, rollers or

needles Rolling over lubricant film. Uneven or distorted sound is a signal of a problematic bearing.

Even in a motor when the carbon bushers are worn out, insulation is damaged, the sparking increases.

One can hear that too.

WHERE ALL IT COULD BE USED ?

While, it can be used, for a variety of ARIHANT INSTRUMENTS APPLICATIONS, some of them 

are

Locating a faulty steam-trap

Spotting a leaky valve.

Checking malfunction of bearings, journals etc.

Detecting faults in machine tools or any mechanical equipment.

Identifying inefficient electric motors.

(P.T.O.)

WHY USE IT ?

CASE-I : BEARINGS

A host of machine tools, motors, compressors etc. are used by an industry, faulty bearings, worn

out moving parts etc. are usually repaired or replaced either at the time of planned shut down or when

there is breakdown. Breakdowns are always expensive. One can avoid them by bearing the warning

signals through AUDIO PHONE AIM-9. Such audio signals are given out by bearings, journals

rotating parts, for that matter by any moving part of machine, much before the actual failure occurs.

Once one has heard such a sound or noise, preemtive or corrective action could be planned.

CASE II : STEAM TRAPS

When steam is used for indirect hearing condensate is usually collected and returned back to the

boiler. It cuts down the fuel bill and reduces the water treatment cost. However, if the steam traps do

not, function properly it does cost much more in terms of steam loss than the savings intended.

Locating a faulty steam trap amongst many connected to the condensate return line particularly, is,

often difficult even where sight glasses are Installed. It is here one could profitable use AUDIO

PHONE AIM-9 to locate the faulty trap, Once identified it can be repaired or replaced

immediately.

CASE III : VALVES

Valves are often used on pipe lines carrying chemicals, fuels, compressed air, steam etc. It does

happen sometimes that the valves do not close perfectly. It could be because of some damage,

impurities etc. The result however is that valve steam does not sit properly on its seat and valve leakes

even when it has been completely closed. Apart from the loss of valuable materials, consequences at

times could be dangerous from safety point of view. It is therefore, worthwhile to periodically ensure

that valves are functioning properly, AUDIO PHONE AIM-9 can help you

in detecting the leaky valves.

WHO CAN USE IT ?

Every industry, Since no special skills are required it can be used by any body right from Plant

Manager,

Engineers to shop-floor workers.

IT SAVES many times more that it COSTS.